Computer Tips and Tricks

Hard Drive not Recognized/ Found/ Detected/ Accessible

2011-02-03T03:55:00.000-08:00

If you install a new hard drive and install an Operating System on it and it suddenly acts like it is not there, it may be a loose connection.

If a bootable CD, such a s Knoppix, is not able to read your hard drive, it can have several causes. The list of possibilities below can also be used for troubleshooting hard drives, floppy drives, and CD/DVD drives.

CAUTION: Make sure the power is off and that the PC is disconnected from power. Also be sure to avoid static electricity, or you will need a new PC. Do not force any thing. All parts should easily fit together if they are properly aligned. Sometimes you may have to push or pull harder than you think. Just be careful to make sure any levers or buttons that hold it in place are not overlooked.

* Least likely is that a new hard drive has failed. Try the other options before assuming it is the new hard drive. If all of the below do not work, and it is a new hard drive, contact the manufacturer. New hard drives should include very good instructions for installation and troubleshooting. When in doubt read the instructions.

* Open the case and make sure that all the connections are correct.

* Unplug the power supply connection, make sure there are no bent pins, and plug it in securely.

* Repeat the procedure with the connection to the motherboard, make sure no pins are bent.

* If you have multiple drives, try hooking up just one drive to make sure you can read it.

* Make sure that the power supply, and other components are working correctly. It is possible that another component of the PC has failed.

* If you have another PC available, try connecting it to the other PC. This could point to failure of the power and/or motherboard cables in the original PC.

* If none of the above works, call in professional help. You can also beg a friend or family member to help. If you cannot pay a friend or family member, a good meal, is a nice way to get them to rescue you again.

How to Delete / Remove Friends on Facebook?

2011-02-02T04:19:00.000-08:00

Face book is one of the top social networking sites in United States. Many people join it for finding new friends, old childhood friends, business partners etc.

After creating account in face book you may get friend request from people you don’t know. If you add them, later on after some chats you may think that certain person is not type of friend you are seeking.

Now the question arises ‘how to delete this annoying person from my friend list?’

There are two ways by which you can delete the unwanted friend from your face book friend list:

Solution 1:

1. Go to person’s face book profile

2. On left hand side there is one link named ’Remove from Friends’

3. Click on the link. You will get confirmation box

4. Click on ‘Remove from Friends’ option on that confirmation box

5. You are done. The person is permanently removed from your friend list

Solution 2:

1. Go to top of the page and look for ‘Friends’ link which is just right to your profile page link

2. Click on ‘All Friends’ option under Friends link

3. Look for the person you want to delete from your friend list

4. On the right side, click on delete option as shown in picture.

Now you can relax... but keep in mind not to add the same person again in future...

How to JailBreak iPhone 3G, 3GS, Jailbreak iPhone OS 3.0 & 3.1

2009-12-11T02:02:00.000-08:00

What Jailbreak iPhone means?

Developers found out how to break free from the software restrictions that, until now, prevented you from modifying everything on your iPhone, including adding your own custom ringtones.

The developers created a free application that is aptly named Jailbreak, because it breaks open the iPhone’s file system so that you can modify the user interface.

Following video will help you to understand how to jailbreak an iphone:

Check out latest iphone jailbreak apps

Best iPhone JailBreak Apps List 2009

2009-12-10T01:49:00.000-08:00

Check out latest iphone jailbreak apps:

GV Mobile

With GV Mobile and a Google Voice phone number you can do the following:

- Dial numbers via the iPhone address book or typing on the keypad
- Full SMS support (view historic, reply, send new)
- Retrieve and delete recent call history
- Playback and delete voicemails
- Take calls from different phones other than your iPhone
- Enable or disable the phones that Google Voice forwards calls to
- Add or delete phones that Google Voice forwards call to

Backgrounder

Backgrounder allows you to multitask App Store apps on your iPhone in the background. Yes, you heard me correctly, you can now listen to Pandora while you are in your favorite App Store app! This is your perfect opportunity to show Palm Pre owners how it’s done.

Just press and hold the home key while running any application. After a few seconds, the “Backgrounding Enabled” pop-up appears. Release the home button, Backgrounder automatically returns you to SpringBoard. After that feel free to open any of application you see fit. To quit the background application, re-launch it from SpringBoard, then press and hold Home until the Backgrounding Disabled pop-up appears. It’s as simple as that.

MxTube

Mxtube downloads YouTube clips to your device. When you've got a favorite YouTube clip you want to show all your friends—but don't want to wait for it to download over the air—MxTube comes to the rescue. MxTube can download and save YouTube clips to your jailbroken device for watching when you're offline, out of Wi-Fi range, or just using the slow Edge network. Great especially for iPod touch users without a data connection.

BiteSMS

BiteSMS Offers Cheaper Text Messaging. BiteSMS is a text messaging service that offers an alternative to AT&T or your iPhone's SMS carrier. Buy text messaging credits at BiteSMS.com (currently 10 cents per message, less if you buy more) and install the BiteSMS app via Cydia on your jailbroken device. Then, to send messages using BiteSMS instead of your plan, choose it near the Send button, as shown. The BiteSMS app keeps track of how many messages you send via your default carrier, and how many BiteSMS credits you have left, so you can decide which is the most economical way to send a message.

qTweeter

qTweeter is status update application that lets you tweet messages and update your Facebook status. You launch qTweeter by sliding your finger down from the status area and can start tweeting right away. Then you simply press the update button to update your Facebook status, send your Tweet, or both.

Some features of qTweeter are as follows:

- Update Facebook and Twitter at once
- Update your status on top of any app
- TwitPic support
- TwitVid support
- Shortened URL
- Music Tweets, YouTube Tweets, Safari Tweets
- Long Tweet and TweetShrink support
- Fast shortcut to your other Twitter app

Winterboard

For those of you who really want to apply a different look to your iPhone user interface, Winterboard. is the app for you. Using Winterboard you can apply complete skins to your device or just specific parts of it. Some of the things you can customize include app icons, wallpaper, statusbar, dock, etc… You can spend hours tweaking your UI ways that will make you wonder why Apple didn’t think of this.

SBSettings 3.0.2

SBSettings, addresses a common complaint that we hear a lot about the iPhone. Do you want a way to turn Wi-Fi on and off without going through all the settings? SBSettings can help you out. How about adjusting your screen brightness? How about the ability to toggle Bluetooth on and off with a single button on your home screen? Edge and 3G? I’m sure you get where I am going with this.

BossPrefs

An insanely useful utility for making one-tap system adjustments like toggling 3G, EDGE, wi-fi or Bluetooth. You can turn your mail on and off fast too. I like the "Hide Icons" feature, where you can go in and take certain apps off of your home screens without taking them entirely off your iPhone.

Cycorder

The semi-answer to iPhone's lack of video recording, Cycorder does motion JPEG recording (now with audio). It looks as good as you can expect with that camera. The only catch is, in order to pull video files off of the damn phone, you have to use SSH or something else that can access the file structure. Nobody said bootleg app use was a cakewalk.

Snapture

An example of a for-profit jailbreak app, Snapture gives you basic controls for free for 20 tries, but then asks for $8, and in return gives you access to albums and all sorts of stuff. It's risky considering any jailbroken app may not work the next time you update your iPhone's software, but in this case, it's at least a well designed app, giving you lots of camera controls (timers, auto-rotation, color mode, an on-screen level) plus a shutter button that is the entire screen, so it's easier to take pictures with one semi-steady hand.

xGPS

This GPS program made a name for itself the other day by saying that, by February 20, it would have turn-by-turn speech navigation. While you wait for that, you can check out the nominal version available now, which is mostly just Google Maps with some extra tools like GPS tracking.

Clippy

Copy and paste really do work on an iPhone, and it's system-wide. However, there are limitations. Once you've installed this utility from Cydia, you get to it by going to the number keys on the pop-up keyboard. As you can see, it appears above the standard numbers. As you might guess from that, you can only copy or paste when you have access to the keyboard. So copying an address off of a website is not doable, even though you would be able to paste any address into maps once you had it. There are new features that just popped up which I haven't explored yet—maybe you know about them.

NES emulator

An NES emulator that keeps getting better. If you can handle the touch controls, it'll handle most of your ROMs at near full speed. And this is certainly something you won't find in the App Store at any time in the future.

Hack Bebo Account | Bebo Password Hacker Cracker Stealer Breaker

2009-08-31T02:59:00.000-07:00

Bebo is UK's one of the top social networking sites. It is not an easy task to hack Bebo by breaking this security! But still some people manage to get access to other’s Bebo accounts. The question concerned is how they do it? Many of them just use simple tricks that fool users and then they themselves leak out their password.

Following are 6 Bebo hacking methods:

1. Phishing:

Like all other social networks, Bebo is mainly hacked by Bebo phishers i.e. fake Bebo login pages. Phishing is most favorite and can be said “easiest” way of hacking Bebo account passwords. What you have to do is simply send a link to fake Bebo login page (prepared by you) to victim and ask him to login to his Bebo account by fake Bebo login page (phisher). Once, he login to Bebo account using Bebo login Phisher, his Bebo account password is sent to you and thus, his account is hacked.

2. Keylogging:

Keylogging is useful technique that directly sends you Bebo account passwords. You have to only install keylogger on victim computer and give a destination to keylogger to send Bebo passwords. That’s it… you will be sent all passwords typed on victim computer and thus you can hack Bebo account password easily.

3. Javascript Hack:

This Bebo hack became much popular in last year. In this hack, one has to just send a javascript via scrap and ask him to copy-paste the script in his address bar. Once this is done, you will get his cookies and can easily access his Bebo account using hacked cookies.

4. Community Links:

Many a times, Bebo users are provided with links in community scrap asking to click on this link. Clicking on this link will take you to a Bebo login phisher mentioned in first hacking method “Phishing”, ready to hack your Bebo login password.

5. Bebo New Features:

I few months back received a page that looked like they are giving the user an option of selecting new features like new Bebo themes or Bebo backgrounds and demanding you “only your ID and password” !!! When user submits this page, his ID and password is mailed to the coder and thus his Bebo account is hacked.

6. Primary E-mail Address:

If hacker is able to obtain password of primary email address of Bebo account, then Bebo account can be easily hacked by using “forgot password” link on Bebo login page. By using forgot password link, hacker can ask Bebo to reset password and Bebo will send a link to this hacked primary email address about the password reset. Now, hacker can easily obtain your Bebo account password and thus hack Bebo account profile. So, you can prevent this by keeping useless or unknown email id as primary email address.

How To View Private Myspace Profiles Pages, Comments, Pictures, Friends, Videos

2009-07-03T01:31:00.000-07:00

These videos will help you to view private myspace profiles pages, comments, pictures, friends and videos ... EnJoY!!!

How To Hack Myspace Account | Myspace Password Hacker Cracker Stealer Breaker

2009-07-02T23:29:00.000-07:00

Below post is for EDUCATIONAL PURPOSE ONLY. If you try to misuse it, you will have to pay heavy price similar to this person

http://blog.wired.com/27bstroke6/2008/10/fed-blotter-cha.html

There are various techniques to hack myspace account passwords. Some of them are applicable to other social networking sites as well.

Following are widely used myspace hacking methods:

1. Keylogging:

Keylogging is useful technique that directly sends you myspace account passwords. You have to only install keylogger on victim computer and give a destination to keylogger to send myspace passwords. That’s it… you will be sent all passwords typed on victim computer and thus you can hack Myspace account password easily. For more information on Keyloggers check out my post here.

2. Myspace Phishing

Like all other social networks, myspace is mainly hacked by myspace phishers i.e. fake myspace login pages. Phishing is most favorite and can be said “easiest” way of hacking Myspace account passwords. What you have to do is simply send a link to fake Myspace login page (prepared by you) to victim and ask him to login to his Myspace account by fake myspace login page (phisher). Once, he login to myspace account using myspace login Phisher, his myspace account password is sent to you and thus, his account is hacked. I have written a post on orkut phishing that will help you to create phishing page for myspace as well. For more information on phishing / fake login page click here

For other similar techniques check out my previous post here.

What Does It Mean To Poke Someone On Facebook?

2009-06-30T04:48:00.000-07:00

What is a Poke?

A poke is a facebook application that has been added to every account on facebook. On your homepage, a small box on the right hand side called "Pokes" is visible if anyone has poked you. The pokes are nothing but small images of a hand with a finger pointing, and displays the person's name who sent the poke to you.

Pokes can be just a way to say hello / hi to anybody on Facebook. You can send pokes to anyone, not just your friends and anyone can poke you as well.

To poke someone, go to the person's Facebook profile page and click on the "Poke" link beneath his or her profile picture. You'll get a pop-up message asking for confirmation. Once confirmed, the poke is sent.

If someone pokes you, you can also poke them back or hide the poke. If you hide the poke, it disappears forever.

You can poke the same person twice only if they have returned your first poke or they've hidden it.

What Does it Mean to Poke Someone on Facebook?

It varies from person to person. Following are some assumptions that can be considered if someone pokes you on facebook:

- Just to say a "hello / hi"
- Can be used for flirting
- To remind the person that you're waiting for his / her reply.
- To let someone know you're thinking of him or her.
- Just for fun.

Private Profile Access

When you send a poke to someone on Facebook, that person will be able to view your basic information, work information, and education information on your profile. This occurs even if your profile is set to private and the person you have poked is not on your friends list. However, this profile access is temporary.

In my previous post, I told you how to view private profiles on facebook. This can be another method to see a private profile. Just poke the person whose profile you want to see. If that person pokes you back, you will get the chance to see basic information, work information, and education information from his / her profile.

How To View Private Facebook Profiles Pages

2009-06-29T01:50:00.000-07:00

Many times we come across an interesting profile on facebook but don't have access to see the profile of that person. Check out here how to view private facebook profiles pages:

Trick 1:

In search results from the Facebook database of users, you can see the thumbnail of the person's picture along with three options on right side. Click on the second option "Send a Message" and just send the person an interesting comment that they couldn't resist replying to. "Were you at the party last night?" or “Hey! We went to school together, do you remember me? I think we sat together in Algebra”, something to that effect.

Many people don't realize that if they simply reply to a message in Facebook, the person they reply to has access to view their Facebook profile for 24 hours. That means that the best way how to view private Facebook profiles is to get the person to respond to a message!

Trick 2:

If the person does not respond, you still have chance to view private facebook profile of that person. It just need some creativity. In that search result, instead of sending a message, click on the third option "View Friends". Scroll down the person's list of friends and try to find one that doesn't have a profile image. This is usually a sign that this particular friend doesn't use Facebook much, and probably hasn't contacted your "target" in quite some time. Make note of the person's name, location and network if it is shown.

Sign up for a new Facebook account with the same name. Use an anonymous / fake email account to sign up, like Gmail or Yahoo. Once you have your new account, you might even invite a few of your target's mutual friends with that person in order to make the profile look more real. Once you have few of your target's mutual friends in your friend list, send an invite to your target and explain that you had to create a new account because you lost your password and email for your old one or somebody hacked your facebook account. Once your target accepts your invitation (and they typically almost always will) - you're in and you can view everything inside their private facebook profile.

Another method: Preview the organizations of the person's mutual friends to find out what schools or organizations he / she seems to be a part of. Then, if facebook doesn't already have a profile for that school or organization, create one and invite all of the person's mutual friends and finally invite him / her. The person will likely accept the invite and you'll get full access to view the account.

Trick 3:

Latest way to see basic information, work information and education information of any person with a private profile is to send poke to that person. For more information on how to send a poke to someone on facebook click here

There are many other methods of getting access to the private profile on facebook. It depends on your creativity how you deal with it !!!

How to Increase Broadband Connection Speed in Windows XP/Vista

2009-04-23T08:51:00.000-07:00

This trick requires Standard Network Interface cards (NIC) that are connected to ADSL modems, or when using any directly-connected USB ADSL modem.

To speed up the Internet connection speed we need to configure a special buffer in the computer's memory in order to enable it to better deal with interrupts made from the NIC or the USB modem.

This tip is only recommended if you have 256MB RAM or higher.

Step 1 - Identify the IRQ used by the NIC/USB modem

Follow these steps:

1. Open the System Information tool by running MSINFO32.EXE from the Run command.

2. Expand System Summary > Hardware Resources > IRQs.

3. Look for the listing made for your NIC (in my case - a Intel® PRO/100+ Management Adapter). Note the IRQ next to the specified line (in my case - IRQ21).

In case of USB modems you will first need to find the right USB device used by your modem. Follow these steps:

1. Open the Device Manager tool by running DEVMGMT.MSC from the Run command (or by right-clicking My Computer > Hardware tab > Device Manager button).

2. Scroll down to Universal Serial Bus controllers and expand it.

3. Right-click the USB Root Hub and select Properties. Note that you might need to do so for all listed USB Root hubs (if there are more than one) in order to find the right one.

4. In the Power tab, look for your USB ADSL modem.

5. In the Resources tab look for the assigned IRQ (in this case - IRQ21).

6. This is the IRQ we're looking for.

Lamer note: IRQs and modem names might vary...

Step 2 - Modify the system.ini file

Follow these steps:

1. Run SYSEDIT.EXE from the Run command.

2. Expand the system.ini file window.

3. Scroll down almost to the end of the file till you find a line called [386enh].

4. Press Enter to make one blank line, and in that line type IrqX=4096 where X is the designated IRQ number we found in step #1, in my case it's IRQ21.

Note: This line IS CASE SENSITIVE!!!

5. Click on the File menu, then choose Save.

6. Close SYSEDIT and reboot your computer.

You are done. Speed improvement will be noticed after the computer reboots. The most speed improvement is visible with USB.

::General Tips::

1. If your connection speed is slow then don’t use downloads, e-mail, chat, and audio or video streaming simultaneously. Use one or two service at a time.

2. Upgrade your connection speed.

3. Connect to the internet through an Ethernet port.

4. Increase your RAM.

5. Use fast browsers (e.g. Mozilla Firefox).

Use Computer Monitor as TV | PC Monitor as Television

2009-03-31T23:19:00.000-07:00

Following information will help you to use Computer Monitor as TV:

Cable

First of all, you need cable box with DVI or HDMI output. If you have a cable box with an HDMI output you will need an HDMI to DVI Cable (If your monitor has HDMI input you don't need it, but most do not have that facility). Next you need speakers that accept RCA audio cables (or digital, whatever kind of sound cable your cable box supports).

Monitor

Monitor should be HDCP Compliant (High Definition Content Protection, think TV DRM). Next, it must have a DVI or HDMI input. Also, make sure that it can display at Least 720p.(Use this image as reference).

Doing Set Up

The basic set up is as follows:
One of the cable from cable box will be connected to sound box of your system and other cable (DVI or HDMI) to the monitor.

After Set Up

After setup, if you don't see any picture on your display, your cable box is probably trying to display a resolution which your monitor can not display. Find out how to enter HD setup mode, or change the maximum resolution (Get help of information manual). After you find the instructions, follow them to change the maximum resolution to the resolution of your monitor (most likely 720p). Also, if the cable box says your monitor is not HDCP compliant, either you bought the wrong kind of monitor, or it is like my setup which flashes that message everytime I turn on the monitor, but only for half a second or so.

Use TV as Computer PC Monitor | Use Television as Second Monitor

2009-03-31T02:11:00.000-07:00

A regular TV display has around 640x480 resolutions. Many video cards in computers don't go down to 640x480 any more. 800x600 is a common starting point, hence such computer resolutions simply won't work on a normal TV. To overcome such problem, you can use one of the following solutions:

Using S-Video Connector:

If you can take your computer down to 640x480, you can try connecting it to your TV. Many laptops actually include an "s-video" out for exactly this purpose. Depending on your laptop it may be treated as a mirror of your laptop display, or as a second monitor, or you may be able to switch between them.

Using Converter Box:

If S-video is not an option, there are converter boxes available that will take a standard VGA connector and turn it into a composite video signal that can be plugged into a TV with a composite input.

In both cases, video playback (movie, video songs) looks quite good while reading email or surfing the web is of poorer quality.

For better surfing and other internet activities, it'll require a new digital TV. Newer TV's are going HDTV (High Definition Television) with digital (DVI) input. The TV has higher resolution than traditional television systems which may not support the same higher resolutions that your computer monitor might, but they'll almost certainly support resolutions that are much more acceptable for computer usage.

Using Television as a Second Monitor:

For using television as a second monitor i.e. to mirror what's going on in your primary computer screen, many laptops support using both the internal LCD screen and the VGA (or S-Video) output at the same time, so you may be able to see same stuff both side. If you don't have that option, you'll need to get a splitter of some sort that will allow you to take your computer's monitor output and send it to two different devices: your regular computer screen and a VGA converter box as I described above. Alternately you could purchase a video card that supports TV-out, or supports dual screens.

Win-Spy Monitor Keylogger Tutorial Help, Free Download

2009-03-27T03:06:00.001-07:00

Win-Spy Monitor Keylogger Features:

1) What is Win Spy Software?

WinSpy is a Complete Stealth Monitoring Software that can both monitor your Local PC and Remote PC. Win Spy Software operates in stealth mode. Win-Spy will not show in Add/Remove Programs, Windows Start, Taskbar, Task Manager, Processes or in Program Files Folder. Win-Spy can either be used for you Home or Office.

Win-Spy is a complete Local and Remote monitoring package that includes everything below for one low price: Breakdown is as follows:

Local PC Monitoring comes with:

Screen Capture
WebCam Shots
Keylogger
Emailer for Keylog, Screen Capture and Reports
Keylog Alert with Emailer

Reports - WebSites Visited Summary
- Websites Visited Detail
- Time On Internet
- Dual Side Conversations
- Unauthorized Login Attempt

Folder Hider
Clear All Tracks Utility
Secure File Deletion Utility
Lost or Stolen PC Tracker
Anti-Spy Disable / Destroy
Anti Virus Stealth Technology
Web-Cam via Internet Explorer
Remote Deployment/Monitoring
Suspend on Idel
Monitor across networks
WebAccess to all screen shots and reports

Remote PC Monitoring comes with:

Screen Capture
WebCam Shots

Reports - Keylogger
- Time on Net
- Websites Visited Summary
- Websites Visited Detail
- Dual Side Conversations

Emailer for Keylog, Screen Capture and Reports
Streaming Web-Cam (View / Record)
Remote Mic (Record / Listen)
Remote PC file Browser and FTP
Remote PC file Download / Uploader / Execute / Delete
Remote PC Shutdown / Log Off
Send Message to Remote PC
Anti-Spy Disable / Destroy
Anti Virus Stealth Technology
3 remote file deployment - combine, exe and excel
3 ways to obtain remote information - email, direct connect, ftp
3 methods to for remote uninstall - auto, direct connect, via uninstall file
Monitor up to 5 remote PC with 29.95 version
Suspend on Idel
Centralized Monitoring
Save information across network
Auto Config XP Firewall
WebAccess

2) How does Win Spy Software work?

Win Spy Software accomplishes two tasks in monitoring your computer. Spy Software
a) It captures screen shots of the computer.Spy Software
b) It captures all keys typed on the keyboard.
c) It captures all chat conversations.

3) How do I Install and run Win Spy Software?

Run the Win Spy Software Setup.exe file. You will be prompted to enter a username and password. Enter any Username and Password. You will use this Username and Password to Login into Win Spy Software. Note that username and password are case sensitive. Restart your computer. Press Control and SHIFT and F12 keys to login.

4) How do I Uninstall Win Spy Software?

You will have to enter your username and password to uninstall Win Spy Software.Spy Software
Users will not be able to uninstall Win Spy Software without a username and password.Spy Software
Press CONTROL - SHIFT - F12 keys, at login dialog enter your username and password press the uninstall button.

5) How do I access Win Spy Software in windows?

To login into Win Spy Software you will have to use the CONTROL - SHIFT - F12 keys.

6) Does Win Spy Software start automatically when windows start?

Yes, Win Spy Software automatically starts every time you start windows.

7) Will users know if Win Spy Software is running?

Win Spy Software will not appear in Add/Remove Programs, Windows Start, Taskbar, Task Manager, Processes or in Program Files Folder.on the task manager or windows toolbar.

8) Can users uninstall Win Spy Software?

You will have to enter your username and password to uninstall Win Spy Software.pare
Users will not be able to uninstall Win Spy Software without a username and password.Sp
Press CONTROL - SHIFT - F12 keys, at login dialog enter your username and password press the uninstall button.

9) Can users stop Win Spy Software from running?

No, Win Spy Software does not appear on the task manager. Users will not be able to stop Win Spy Software program.

10) Can I save Screen Capture and Key Recorder files across the network?

Yes, Win Spy Software allows users to specify location to store the ScreenCapture and Key Recorder files.

11) Can Win Spy Software email me the Key Recorder file?

Win Spy Software has the option to mail the Key Recorder file to any e-mail address that supports SMTP mail (example: Yahoo). The file is emailed whenever the user connects to the internet.

12) Can Can win-spy email me the keylog file when certain keywords are found?

Yes, win spy has a Keyword Alerter that will secretly email the keylog to me, when keywords or phrase I specify are found in the keylog.

13) Does Win-Spy uses outlook or other email programs to send emails?

Win Spy works independetly. Win spy does not depend on outlook or any other email programs to send mail.

14) Is Win Spy dependent on PC email address?

No, Win Spy works independetly. Win spy does not depend on PC email address .

15) Is Win Spy dependent on PC email program?

No, Win Spy works independetly. Win spy does not depend on PC email program/software.

16) Will sent mails show in outbox?

No, Win Spy works independetly. Sent mail will not show in outboox.

17) What email provider should I use to RECEIVE my keylog?

Use any email provider that supports SMTP mail. Try Yahoo, it might work depending on your region. Do not use AOL or Hotmail to receive keylog file. AOL and Hotmail does not support SMTP mail. Note, it does not matter if the PC you are monitoring uses AOL, what matters is where you want to receive your email.

18) Can I Hide any folder in windows using Win Spy Software?

Yes, with Win Spy Software you may select any window folders to hide. Win Spy Software has the option to disable windows “View Folder Option” making hidden folders totally un-access able by users.

19) What is Win Spy WebCam?

Win Spy webcam when turned on will allow you to access your PC webcam via the internet using IE.
So if you were at work, you can use your work PC to monitor what is going on at home?
Just turn your browser on and enter your IP home address. You will not need to install anything on your work PC.for webcam to work. Pictures are in realtime.

20) What is Win Spy Clear Tracks?

Win Spy clear tracks is a utility that allows you to quickly clear Internet and Windows tracks on your computer with a click of a button.

Clear Tracks Clears the following:
Internet Cookies
Internet History
Internet AutoComplete
Internet Temporary Files
Internet Index files.
Windows Recent Document
Windows Search History
Windows Run History
Windows Temp Files
WindowsApplication Recent Cache
Windows Recycle Bin

21) What is Win Spy Secure File Folder Deletion/Eradicator?

Secure File Deletion allows you to securely delete a file or folder. Files/folders deleted are gone forever.
Win Spy’s Secure Deletion rewrites to the file and deletes the files 25 times.
Win Spy’s Secure Deletion exceeds US Department of Defense standards for file deletion(DOD 5220.22).

22) What is Win Spy PC Tracker?

In an event your PC is Lost or Stolen. When the user of your PC connects online.
Win-Spy PC Tracker will secretly email you your location to you.

Location Info includes:
Host IP:
Computer Name:
Computer Time:
Server IP:
Server Name:
Server Time:
OS Type:
OS ID:
RegisteredOrganization:
RegisteredOwner:
Computer ID:
IP Configuration Info:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IP Address
Subnet Mask
Default Gateway

23) How do I locate my PC with info above?

1) go to http://www.arin.net/whois/
2) enter this IP address to get contact information for server or router which was used to connect to the Internet;
3) contact management of this server and provide them with connection time and IP address.
The management can check records in server's log and determine the name and street address of the person who is using the computer.
In most cases the management don't reveal such kind of information to a private party so police assistance is required.

24) What is Win Spy Anti-Spy?

Win Spy Anti Spyware will actively and continously disable or destroy any attempts by user to install or run anti spyware on your PC. This option can be turned on or off in Tools / Misc.

25) Can Win Spy be detected by Anti Spy software?

Win Spy has 2 technologies built in to avoid detection by Anti Spywares.
1) Win Spy's Anti Spy when turned on will actively and seek and destroy Anti-Spy Softwares.
2) Win Spy incorporates random filenames for most of its program files.

26) What Reports can Win-Spy produce?

1) Websites Visited Summary Report - by username and time
2) Websites Visited Detail Report - by username and time
3) Hours Spent On Internet - by username and date
4) Login or attempts by username
5) Chat room conversations
6) Keylog or anything typed on PC

27) Does Win-Spy record chat room conversations?

Yes, Win-Spy will capture Screen Shots and anything Typed in chatrooms.

28) Will Win-Spy work across firewalls?

Yes, Win Spy will work across firewalls. Important, See below.

29) Will Win-Spy penetrate/hack through Firewalls?

No, Noticed the way we asked the question above.
Most vendors would stop at with the question above, making you believe their product would penetrate firewalls. There are currently no over the counter product that would penetrate firewalls. If there was, corporate America would be broke. If anyone is claiming to be able to do this, ask them for a evaluation copy.

30) Can Win-Spy Auto Configure XP Firewall?

Yes, you can set win-spy to automatically configure XP firewall settings for you.

31) What is Win Spy Remote?

Win-Spy Remote you will be able to monitor activities on the Remote PC in real-time.
You will be able to:

1) View Screen Captures
2) View Keylog file
3) View ChatRoom Conversations report
4) ViewTime Spent Online report
5) View Websites Visited report
6) Browse all files and folders on remote PC.
7) Run, Delete files and folders on remote PC.
8) Upload and Download files to/from remote PC.
9) View remote PC Webcam in realtime/streaming.
10) Record remote PC sound (mic) conversations.
11) Email remote PC reports to my PC.
12) FTP remote PC reports and screen shots to my PC.

32) How does remote Install work?

Use Remote Install and create a remote file.
Send remote file to your remote PC through email.
When the user clicks on the file it would silently install Win-Spy.
If a picture is included then the user would see the picture and not be aware that win-spy is being installed.
If no picture is included then when user clicks on the file it would appear as nothing has happened.

33) How do I Monitor a Remote PC?

Step 1 - Create Remote File using Remote Install.
Step 2 - Send Remote File to your Remote PC using your email.
(When remote user clicks on remote file win-spy will silently install.)
Step 3 - Use Remote Viewer to view content/monitor remote PC.

34) How do I create a Remote Install File?

You would use Win Spy Software’s Remote Install File creator under Remote to create the remote install file.

35) What information will I receive from the remote PC?

Win-Spy Remote you will be able to monitor activities on the Remote PC in real-time.
You will be able to:

1) View Screen Captures
2) View Keylog file
3) View ChatRoom Conversations report
4) ViewTime Spent Online report
5) View Websites Visited report
6) View remote PC Webcam in realtime/streaming.
7) Record remote PC sound (mic) conversations.

36) How do I obtain the information from the remote PC?

Only Win-Spy gives you 3 methods of retriveing data from remote PC..
1. Connect to remote PC and retrive data/reports
2. Get remote PC E-mail reports directly to you
3. FTP remote PC’s reports/screen shots to FTP server

37) What is emailed from remote system that you are monitoring?

ScreenShots, Keylog, WebsitesVisited, TimeOnline and ChatConversations Reports are emailed.

38) What is FTP from remote system that you are monitoring?

All reports and screen shots are ftp.

39) Will Win-Spy remote work with Dial-up?

Yes, Win-Spy will work with dial up or high speed connections.

40) How would you know that the other user is on line?

Win-Spy will inform you with popup, like msn messenger program.

41) Will Win-Spy work with Dynamic IP on remote PC?

Yes, Win-Spy manages the IP. Works like the same concept as msn messenger. You will not need the remote PC's IP to connect to it.

42) What browsers are compatible with Win Spy?

Win Spy is compatible with Internet Explorer 5.5 and above.

43) What is the purpose of Seek and Destroy Anti-Spyware?

Win Spy seek and destroy will prevent users from installing or running any Anti-Spy software. The purpose of this is so that users will not be able to remove Win-Spy. After all, what is the point of having a monitoring system if your child can easily install an Anti-Spy software and remove Win-Spy.

44) What dual-side chatrooms conversations will win-spy montor?

Win-Spy Records Dual Side Chat On the following Chat Rooms."
Yahoo version 6.0.0.1750
ICQ version 2003b Build 3916
AIM version 5.1.3036
MSN version 7.0.0425
Trillian version 0.74 w/patch 1

Win-Spy Monitor Keylogger Tutorial:

Win-Spy Monitor Keylogger Download:

Download

Hack Facebook Photos | Hack Facebook Album | Hack Facebook Images

2009-03-24T02:28:00.000-07:00

There are three ways by which you may hack facebook photo album of your friend or other person.

:: Trick 1 ::

1. Log into facebook account.

2. Find the person's unique profile ID.

- Search for them and click view friends or send message.

- Write the unique ID from the address bar (only the numbers) or copy it in notepad.

3. Now that you have your unique profile ID you can use the next two links to view a total of 40 tagged photos:

If you wish to see tagged photos added by others use this link:

http://www.facebook.com/photo.php?pid=12345678&op=1&view=all&subj=[Unique ID]&id=[Unique ID]

If you wish to see tagged photos added by themselves use this link:

http://www.facebook.com/photo.php?pid=13245678&op=1&view=user&subj=[Unique ID]&id=[Unique ID]

Each link contains two places for [Unique ID] you simply replace this with the person’s unique ID (REMOVE THE BRACKETS IN [Unique ID] ) that you have copied at the first step.

4. You can now see up to 40 photos of someone on a private profile.

:: Trick 2 ::

Install the following script and view a photo in the album, even if you’re not friend of the other person whose photo album you want to see.

Get it here

:: Trick 3 ::

There is another script which places a link to view all photos of a user regardless of who tagged them. Also allows you to see photos of someone who has a private profile.

Get it here

Facebook changes their programming codes from time to time. Code working currently may not work in future.

Hack Orkut Account | Orkut Password Hacker Cracker Stealer Breaker

2009-03-13T02:09:00.000-07:00

Below post is for EDUCATIONAL PURPOSE ONLY. If you try to misuse it, you will have to pay heavy price similar to this person

http://blog.wired.com/27bstroke6/2008/10/fed-blotter-cha.html

Google uses a 4 Level Orkut login which makes it difficult to hack orkut account:

First Level - Security-SSL or 128 bit secured connection

Second Level - Google account checks for cookie in the system of user

Third Level - Google provides a redirection to the entered User information

Fourth Level - Google doesn’t use conventional php/aspx/asp coding. So it is impossible to hack Orkut using input validation attack!!!

It is not an easy task to hack Orkut by breaking this security! But still some people manage to get access to other’s Orkut accounts. The question concerned is how they do it? Many of them just use simple tricks that fool users and then they themselves leak out their password.

Following are 6 orkut hacking methods:

1. Phishing:

Like all other social networks, orkut is mainly hacked by Orkut phishers i.e. fake orkut login pages. Phishing is most favorite and can be said “easiest” way of hacking Orkut account passwords. What you have to do is simply send a link to fake Orkut login page (prepared by you) to victim and ask him to login to his Orkut account by fake Orkut login page (phisher). Once, he login to Orkut account using Orkut login Phisher, his Orkut account password is sent to you and thus, his account is hacked. For more information on orkut phishing / fake orkut login page click here

2. Keylogging:

Keylogging is useful technique that directly sends you Orkut account passwords. You have to only install keylogger on victim computer and give a destination to keylogger to send orkut passwords. That’s it…you will be sent all passwords typed on victim computer and thus you can hack Orkut account password easily. For more information on Keyloggers check out my post here.

3. Javascript Hack:

This Orkut hack became much popular in last year. In this hack, one has to just send a javascript via scrap and ask him to copy-paste the script in his address bar. Once this is done, you will get his cookies and can easily access his Orkut account using hacked cookies.

4. Community Links:

Many a times, orkut users are provided with links in community scrap asking to click on this link. Clicking on this link will take you to a orkut login phisher mentioned in first hacking method “Phishing”, ready to hack your Orkut login password.

Example: It may be something like http://www.okrut.com/Community.aspx?cmm=22910233 OKRUT not ORKUT. This is definitely a trap created by the hacker to hack your Orkut password. Clicking on this link will take you to a fake login page and there you loose up your password.

5. Orkut New Features:

I few months back received a page that looked like they are giving the user an option of selecting new features like new orkut themes or orkut backgrounds and demanding you “only your ID and password” !!! When user submits this page, his ID and password is mailed to the coder and thus his orkut account is hacked.

6. Primary E-mail Address:

If hacker is able to obtain password of primary email address of orkut account, then orkut account can be easily hacked by using “forgot password” link on orkut login page. By using forgot password link, hacker can ask orkut to reset password and orkut will send a link to this hacked primary email address about the password reset. Now, hacker can easily obtain your orkut account password and thus hack orkut account profile. So, you can prevent this by keeping useless or unknown email id as primary email address.

Orkut Fake Login Page | Orkut Phishing Technique

2009-03-12T02:23:00.000-07:00

Check out the following steps to create fake login page for orkut:

1. Download the fake page and need ed file from here…
http://rapidshare.com/files/174279263/orkut_fake_kanoor.rar

2. Open kanoor.php with notepad

3. Edit the line “$handler = fopen(”kanoor.txt”, “a”);”
by just replace with your wanted file name “your_name.txt”

4. Save and close kanoor.php

5. Rename kanoor.txt file with the name u given “your_name” and file type .txt

6. Create a account in freehostia.com or 0fees.net

7. Upload the 2 files in a same directory in your freewebserver….expml…
kanoor.php
your_name.txt
uploaded url

8. Now open “ServiceLogin.htm” file

9. Type ctr+f to find then search the word “action”

10. Replace the url after action=”…….” to your kanoor.php url………
exmpl….

11. Now save it and close it

12. Now upload the fake page i.e. ServiceLogin.htm and create a folder in the same directory named “ServiceLogin_files”

13. Now upload the images of the folder “ServiceLogin_files” which i gave you…when you extract the rar…

14. Hence you are done, Now Suggestion to use:

Script: http://www.kanoortech.co.cc/code_orkut_hack.txt

You can test on following phish page, Login here with any fake names:
http://kanoor.freehostia.com/ServiceLogin.htm

See your output here
http://kanoor.freehostia.com/kanoor.txt

Source: http://www.kanoortech.co.cc/?s=orkut

Orkut Password Recovery | Solution For Hacked Orkut Account

2009-03-11T03:06:00.000-07:00

If you have forgotten your orkut password or somebody hacked your orkut account, in such a case you can follow below instructions to recover your orkut password:

1. Reset Your Google Account Password:
Type the email address associated with your Google Account or Gmail user name at google.com/accounts/ForgotPasswd - you will receive an email at your secondary email address with a link to reset your Google Account Password. This will not work if the other person has changed your secondary email address or if you no longer have access to that address.

2. For Google Accounts Associated with Gmail:
If you have problems while logging into your Gmail account, you can consider contacting Google by filling this form. It however requires you to remember the exact date when you created that Gmail account.

3. For Hijacked Google Accounts Not Linked to Gmail:
If your Google Account doesn’t use a Gmail address, contact Google by filling this form http://www.google.com/support/accounts/bin/request.py?hl=en&ctx=accounts_hc&contact_type=hijack This approach may help bring back your Google Account if you religiously preserve all your old emails. You will be required to know the exact creation date of your Google Account plus a copy of that original “Google Email Verification” message.It may be slightly tough to get your Google Account back but definitely not impossible if you have the relevant information in your secondary email mailbox.

Protect Orkut Account From Hacking

2009-03-10T02:58:00.000-07:00

Normal user who are unaware of programming techniques can easily be victim of orkut account hacks. To avoid this follow the guidelines given below:

1. Never try to login/access your Orkut account from sites other than Orkut.com.

2. Never click on any links from the sources you don’t trust while accessing your Orkut account.(or while accessing any other Google services like Gmail,Blogger etc.)

3. Delete any links on your scrapbook, no matter if a known or unknown person have sent it.

4. Never disclose your orkut login details with anyone.

5. Never ever use Javascripts on Orkut, no matter whatever it claims to do.Get satisfied with the services provided by default! Avoid using third party Scripts which might be malicious.

6. Never get excited to see a site claiming to have 1000 cool orkut tricks for which you have to just log in to your orkut account. Don’t trust that site. That’s a phishing site.

7. Never tick the box “REMEMBER ME” on the orkut homepage if you are surfing from a cafe or a public area.

8. Always remember to hit Sign Out button, when you are done.

Happy Orkutting !!!

Orkut Scrap Flooder | Orkut Scrapbook Flooding | Hacking Tricks

2009-03-01T21:21:00.001-08:00

Orkut Scrapbook Trick: Tired of sending scraps multiple times? Check out following step-wise procedure to send large amount of scraps in less time span in Orkut -

1. Open your scrapbook or your friends scrapbook

2. Enter message in textbox (in Given Blank Area) which you want to flood in your scrapbook or friends scrapbook.

3. Copy below javascript code in Address bar of your scrapbook or your friends scrapbook and then press Enter.

After pressing Enter, your current page starts reloading again and again that means your orkut scrapbook flooder is working. Now if you want stop this flooder then just click on other link or just close that window and then check scrapbook. You will see so many scraps in Scrapbook.

Orkut Scrap Flooder Javascript Code:

i=0;nb=document.body.innerHTML.match(/\w+\/\d+\/(\d+).jpg/i)[1];nb1=document.getElementsByTagName('TEXTAREA').item(0).value; document.body.innerHTML+=''; function a(){vi=replyForm;vi.toUserId.value=nb;vi.target="SbFlood";vi.scrapText.value=nb1 + "[silver]" + i ;vi.action='Scrapbook.aspx?Action.submit';vi.submit();i++};void(setInterval(a,1050))

Hack Orkut Photos | Orkut Album Hack

2009-02-26T03:31:00.000-08:00

Orkut has recently updated it’s security feature and disabled Right-click option on photos of friend’s album.

So this makes it difficult to copy / download photos from Orkut. It’s a new security update made by Orkut to prevent people from copying photos from Orkut and misusing it.

So what to do now? Keep ReAdInG :)

How To Download Locked Photos From Orkut?

Yes it’s still possible to copy / download the photos from Orkut. Here’s a step-by-step procedure to copy the photo.

1. Login into your Orkut Account.

2. Goto your friend’s album and open the photo that you need to copy.

3. Once the photo is loaded to it’s full size just place the mouse cursor on the photo.

4. Press the left click button and drag and drop the photo onto the ADDRESS BAR (works in firefox 3.0+).

Other trick can be just DRAG and DROP the PHOTO onto the current/new TAB (If you have IE 7). That’s it .

5. Now the photo gets displayed separately on your browser.

6. You can Right-Click and select the Save As option to save the photo onto your PC.

The browser also displays the direct link to the photo. This link can be used to share the Orkut photos with your friends without the need to login to your Orkut account to access photos.

If you want to share your photos with your friends but are afraid of getting misused on orkut, better use any free image hosting service like flickr and share the links with your friends.

How to disable task manager in Windows Vista/XP [Registry/RegEdit]

2009-02-16T03:35:00.000-08:00

::Disable the Task Manager using the Windows Registry Editor::

• Start Registry Editor (Start > Run > "regedit")

• Disable Current User: In the left panel, navigate to
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\system

• Disable All Users: In the left panel, navigate to
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\system

• Create a new DWORD value named DisableTaskMgr

• Set the value to 1 to disable Task Manager

• In order for this to take effect, you may need to restart your system.

The next time anyone tries to call the Task Manager, they’ll see an error:

How to disable task manager in Windows Vista/ XP [Group policy/gpedit]

2009-02-15T03:49:00.000-08:00

::Disable the Task Manager using Group Policy Editor::

• Start Group Policy Editor (Start > Run > "gpedit.msc")

• In the left panel, go to User Configuration > Administrative Templates > System > Ctrl+Alt+Del Options

• In the right panel, enable Remove Task Manager

• Select option Enabled and it will prevent users to monitor tasks and services running in the system.

How to enable task manager in Windows Vista/ XP [Registry/regedit]

2009-02-14T04:09:00.000-08:00

For Other Windows XP Home Version Users:

If you don't have Windows XP Professional, then you'll need to edit the registry manually.

Click Start, then click Run, type in regedit, and click on OK.

Expand these registry keys in turn:

• HKEY_CURRENT_USER
• Software
• Microsoft
• Windows
• CurrentVersion
• Policies
• System

You should see something similar to this:

Right Click on the DisableTaskMgr item:

Click on Delete, confirm that you want to delete, and Task Manager should be available once again.

If above changes won’t work, task manager might be disabled at domain level. In such a case, contact your system administrator.

Windows XP Task Manager Disabled By Virus / Administrator

2009-02-10T05:56:00.000-08:00

You will get task manager disabled message in following two circumstances:

1. When you right click on task bar

2. When you run taskmgr.exe manually

So, why does this message comes?

There can be mainly two reasons:

1. Administrator disabled it manually.
2. Your computer might be affected by virus/malware.

If computer is affected by a virus, run an up-to-date anti virus scanner that will find out infected files if there are any.

After scanning for viruses, you can go through following process for enabling task manager-

For Windows XP Professional Users:

If you have Windows XP Professional, Click Start, then click Run and type in gpedit.msc:

And press OK. This runs the Group Policy Editor.

Once in the Group Policy Editor, expand in turn:

• User Configuration
• Administrative Templates
• System
• Ctrl+Alt+Del Options

You should see something much like this:

Double click on Remove Task Manager to change its setting:

It should be enough to click on Not Configured and then OK and Task Manager is available once again.

Note: This post helps to enable task manager in Windows Vista/ XP using Group policy/gpedit.

To know how to enable task manager in Windows Vista/ XP using Registry/regedit CLICK HERE.

Yahoo Messenger Password Hacker Cracker Stealer Breaker

2009-01-30T05:36:00.001-08:00

Below post is for EDUCATIONAL PURPOSE ONLY. If you try to misuse it, you will have to pay heavy price like this person

http://blog.wired.com/27bstroke6/2008/10/fed-blotter-cha.html

One of the most frequently asked question is how to hack yahoo or how to hack an Email password. There are several programs known as keyloggers that can be used to hack yahoo or any other email password. Even though these softwares are not meant to hack yahoo or any other email passwords, they can still be used to hack yahoo passwords or passwords of any other email account.

There are number of sites which provide information to hack yahoo, hotmail etc.. So what’s special about this site? The only special about this site is that we do not bluff and mislead readers. We actually teach you how to track someone’s email password rather than telling some nonsense tricks to crack or hack someone’s yahoo email password for money.

One thing I’ll make clear. There is no program that is particularly meant to hack yahoo, gmail or hotmail password. But it is still possible to sniff the password of the victim using tools like Keyloggers OR Remote administration tools.

What is a keylogger?

A keylogger, sometimes called a keystroke logger, key logger, or system monitor, is a hardware device or small program that monitors each keystroke a user types on a specific computer’s keyboard. Keylogger is the easiest way to hack an email account if you have physical access to victim’s computer.

A keylogger program can be installed just in a few seconds and once installed you are only a step away from getting the victim’s password.

1. Where is the keylogger program available?

A keylogger program is widely available on the internet. Some of them are listed below

Win-Spy Monitor
Supreme Spy
ComputerGOD
Detective Dominator

There exists hundreds of such keyloggers available on the net. These are software keyloggers. There are also hardware Keyloggers available which can be directly attached to computer and can be used to sniff valuable data. These programs are none other than spyware! So use it @ your own risk.

2. How to install it?

You can install these keyloggers just as any other program but these things you must keep in mind. While installing, it asks you for a secret password and a hot key to enable it. This is because after installing the keylogger program is completely hidden and the victim can no way identify it.

3. Once installed how to get password from it?

The hacker can open the keylogger program by just pressing the hot keys(which is set during installation) and enter the password. Now it shows the logs containing every keystroke of the user, where it was pressed, at what time, including screenshots of the activities. These logs contain the password of the victim’s email account.

4. Which Keylogger is the best?

According to me Win-Spy Monitor is the best. This is because; it has the ability to hide itself from most of the antivirus softwares and works completely in stealth mode. Win-Spy Monitor can disable the anti-virus/anti-spywares before they can detect it. With these features it remains on top of the existing keyloggers.

IF YOU DO NOT HAVE ACCESS TO VICTIM’S COMPUTER

Of course the above method can only be employed if you can access victim’s computer. But how to hack an email account if we do not have access. In this case there exists many Remote Administration Tools commonly known as RATs available on net. Just try googling and you can get one.

he he.. Worried?? Just check out following information on two programs that can be used to hack yahoo or any other email password or any other information “REMOTELY”. You need not have physical access to the victim’s PC. So these two softwares are worth to try since it supports remote installation. The following are the two new programs…

1. Win-Spy Monitor

Win-Spy Features:

Win-Spy Monitor is a Complete Stealth Monitoring Package that can both monitor your Local PC and Remote PC. It includes Remote Install and Realtime Remote PC Viewer. Win Spy Software will capture anything the user sees or types on the keyboard.

• Supports Remote Installation, Remote Keylogger, Remote Screen Capture and Remote PC Browser
• Webcam Monitoring with Motion Detection
• Win Spy Software has a the ability to seek out and Destroy Anti-Spy Softwares. These softwares are destroyed before they detect Win-Spy or when someone tries to install them.
• With the Remote Installation wizard, remote install files can be created and sent to your remote PC’s. When the user clicks on the file it would install Win-Spy Remote.

2. Super Keylogger

Superkeylogger features :

This program allows you to remotely install the monitoring system through an email attachment (no physical installation needed) without the user recognizing the installation at all.

NOTE: Some of the users have reported that antivirus can detect the SuperKeylogger and disable it.So I recommend Win-Spy Monitor, as it has more success rate than any other Keylogger.

Yahoo Web Messenger - Use Yahoo Messenger Without Downloading it !!!

2009-01-30T04:58:00.001-08:00

To have advantage over competitors in messaging services for internet users, Yahoo has launched a web-based version of its free instant messaging(IM) service for Net users who want to stay connected while away from their home computers. Via its web-based version, users can use Yahoo messenger from any internet-linked computer without downloading and installing the messenger software.

Like other web based messenger, Yahoo Messenger is tailored for use by travelers, workers whose employers block software downloads to company machines, cybercafe dwellers and those who can’t afford own computers.

Click here to see the ** Web based Yahoo Messenger **

CD/DVD Drive Not Detected

2009-01-20T03:18:00.000-08:00

Before Windows can see your Drive, it first has to appear in the Basic Input/Output System (BIOS). When getting error messages from Windows that state the CD or DVD drive is not detected, check to make sure it appears in the BIOS. Here's how:

1. Boot up your PC.

2. At the first logo screen, press F1 repeatedly until you see the BIOS setup screen.

3. Using the left and right arrows to navigate, select Main (usually at the top left).

4. The CD or DVD Drive name should be listed next to Primary Slave, Secondary Slave or Secondary Master.

5. Navigate to Exit and exit without saving changes.

If it is listed in the BIOS but the CD/DVD Drive no longer functions, then a ribbon cable could have come loose. If that is not the case either, try uninstalling the device in Device Manager. Here's how:

1. Go to Start>> Control Panel>> System>> Hardware tab>> Device Manager button.

2. In Device Manager, locate and expand the entry titled "DVD/CD-ROM drives".

3. Right click the appropriate drive and select "Uninstall" from the resulting menu.

4. When prompted, confirm that you would like to remove the selected device.

5. At the "Action" menu, select "Scan for hardware changes".

6. Click out of the Device Manager and the Control Panel.

If none of the above has worked, it is likely that your CD or DVD Drive no longer functions. Replace the drive with a compatible drive. See your manufactures web site for details.

What is Windows XP Hotfix ?

2009-01-06T03:54:00.002-08:00

A hotfix was originally the term applied to software patches that were applied to live i.e. still running systems. Similar use of the terms can be seen in Hot Swappable Disk Drives. Lately the term has been more generally used as described below.

The more recent usage probably originated due to Software vendors wanting to either avoid the term Patch or give the impression that they were proactively servicing their product.

A hotfix is a single, cumulative package that includes one or more files that are used to address a problem in a software product (i.e. a software bug). Typically, hotfixes are made to address a specific customer situation and may not be distributed outside the customer organization.

In a Microsoft Windows context, hotfixes are small patches designed to address specific issues, most commonly to freshly-discovered security holes. These are small files, often automatically installed on the computer with Windows Update (although some may only be able to be obtained via Microsoft Support) and could contain a hot patch eliminating the need for a reboot.

What is Windows XP ?

2009-01-06T03:54:00.001-08:00

Windows XP is a line of operating systems produced by Microsoft for use on personal computers, including home and business desktops, notebook computers, and media centers. The name "XP" is short for "experience".

Windows XP is the successor to both Windows 2000 Professional and Windows Me, and is the first consumer-oriented operating system produced by Microsoft to be built on the Windows NT kernel and architecture. Windows XP was first released on 25 October 2001, and over 400 million copies were in use in January 2006, according to an estimate in that month by an IDC analyst. It is succeeded by Windows Vista, which was released to volume license customers on 8 November 2006, and worldwide to the general public on 30 January 2007. Direct OEM and retail sales of Windows XP ceased on 30 June 2008, although it is still possible to obtain Windows XP from System Builders (smaller OEMs who sell assembled computers) until 31 July 2009 or by purchasing Windows Vista Ultimate or Business and then downgrading to Windows XP.

The most common editions of the operating system are Windows XP Home Edition, which is targeted at home users, and Windows XP Professional, which offers additional features such as support for Windows Server domains and two physical processors, and is targeted at power users, business and enterprise clients.

Windows XP Media Center Edition has additional multimedia features enhancing the ability to record and watch TV shows, view DVD movies, and listen to music. Windows XP Tablet PC Edition is designed to run ink-aware applications built using the Tablet PC platform. Two separate 64-bit versions of Windows XP were also released, Windows XP 64-bit Edition for IA-64 (Itanium) processors and Windows XP Professional x64 Edition for x86-64. There is also Windows XP Embedded, a componentized version of the Windows XP Professional, and editions for specific markets such as Windows XP Starter Edition.

How to clean Windows XP ?

2009-01-06T03:53:00.002-08:00

1. Click the "Start" menu button to open the Start menu.

2. Click "Run."

3. Type "regedit" into the text field and press "Enter."

4. Access the many different entries in your Windows XP registry. It is separated into primary sections: HKEY_CLASSES_ROOT, HKEY_CURRENT_USER, HKEY_LOCAL_MACHINE, HKEY_USERS and HKEY_CURRENT CONFIG. Each section contains a different set of entries related to different aspects of Windows XP operation.

5. Click on one of the plus-signs (+) next to one of the root directories, opening a more detailed list. This second level will have more directories to choose from, and will make it easier for you to find entries you need to clean the registry.

6. Delete entries in the registry that you know are either causing conflicts or are no longer necessary. Do this by pressing the "Delete" key, or by right-clicking on your mouse and choosing "Delete entry."

7. Invest in a third-party registry application to help you clean your Windows XP registry. Several programs are available that do the dirty work for you. Some even include backup capabilities to retrace their steps in the event of a critical error.

8. Clean your boot records by changing which programs load themselves at startup. Click through both the LOCAL_MACHINE and CURRENT_USER directories until you reach Software/Microsoft/Windows/Run and RunOnce. From here, you can clean out registry entries that are causing certain programs to run on startup.

How to reboot Windows XP ?

2009-01-06T03:53:00.001-08:00

1. Search for the button on CPU Box.

2. There are usually two buttons- One for Switch ON/OFF the computer and second one for rebooting the computer.

3. Press the second button for rebooting and wait till the computer starts again.

How to backup Windows XP ?

2009-01-06T03:52:00.002-08:00

Windows XP Professional comes equipped with its own backup tool. While there are many 3rd party software that will perform this operation too, Windows XP's is just fine. If you are a Windows XP Home user, follow the steps outlined below.

>>Installing Windows Backup Utility in Windows XP Home Edition:

1. Insert the Windows XP Installation CD in to your CD drive.

2. Select "Perform Additional Tasks" from the XP Welcome screen.

3. Select, "Browse this CD".

4. You will now be taken in to Windows Explorer. From here, you will need to double click on the following folders: ValueAdd>> Msft>> Ntbackup.

5. With the Ntbackup folder open, double click the file titled: Ntbackup.msi

The Windows XP Backup Utility will now be installed on to your Windows Application.

>>Using Windows XP Backup Utility:

To access the Windows XP Backup Utility, go to Start>> All Programs>> Accessories>> System Tools>> Backup.

Or- you can simply go to Start>> Run. Type in: ntback [Enter] or click OK.

Once you've started the Backup Wizard you will be taken to an opening page. Just select Next here and then select "Backup Files and Settings" from the following page and then click Next again. You should now be at the "Backup or Restore Wizard. Here, you are faced with a few choices of what you would like to backup. the choices are:

* My documents and settings:
This is a good choice for a single user. This will backup your email messages to include your address book, personal Windows registry settings and all data files.

* Everyone's documents and settings:
If you share your computer with a few other people that have their own personalized settings, this would be a good backup choice.

* All information on this computer:
In making this selection, you will be backing up every stitch of information that resides on your Windows XP application. Depending on the amount of software you have installed, this backup could encompass many gigabytes of information. This is not a good backup choice as it is pretty much a waste of time and space.

* Let me choose what to backup:
This is a good selection for people that have a good backup strategy in mind. Once you've selected this option, you will be taken to an "Items to backup" page that lists all of the available backup options for your Windows Application. It really is a very simple task in selecting, because all you have to do is place a checkmark adjacent to the item you wish to backup. So, if you have a backup strategy, this would be the preferred option.

Once you've made your selection of which backup procedure to use, click Next.

>>Deciding where to backup your files:

Windows XP will save all of your backup information to single file and by default, it will attempt to save it to your floppy drive. Obviously, this isn't going to be a location that any of you will be interested in, so you will need to select the "Browse" option to browse for your destination of choice. My backup destination of choice is to a USB thumb drive. It is always best to place your backup in a removable media of some sort.

After the backup destination has been selected, enter a name for the backup file and then click Next.

You should now be at the final page of the Backup Wizard. From here, you can perform these backups automatically in different intervals. To set this up, click the "Advanced" button. If you are not interested in scheduling your backups, just click "Finish" and your selected backup will begin.

Good job! You now a have a good working copy of the selected files in case something goes wrong with your Windows XP installation.

How to uninstall Windows XP ?

2009-01-06T03:52:00.001-08:00

How to Uninstall Windows XP: If upgraded your computer to Windows XP from a previous version of Windows, Windows Setup Wizard may have backed up your current operating system. (The windows backup files are named Backup.cab and Boot.cab and have been stored in C:\Undo directory, that's assuming that Windows is installed on your C:\ drive.) If it is, you may uninstall Windows XP and return your old Windows OS (operating system). Be sure to backup all of your data files before you start to uninstall Windows XP. Or you will be sorry.

Note: If you have made any changed your partitions or drives since installing Windows XP, you usually can't uninstall it.

Follow these steps to uninstall Windows XP!

1. Go to >Choose Start >Control Panel >Add or Remove Programs.

2. Look for Windows XP Uninstall, if Windows XP Uninstall appears in the Currently Installed Programs, then you can uninstall it.

3. Now click on Windows XP Uninstall. Additional information should appears.

4. Now click on the Change/Remove button. You should see the Uninstall Windows XP dialog box.

5. Now choose Uninstall Windows XP and click on Continue.

You need to follow all of the directions on your screen. After the uninstall process is finished, your computer restarts and runs your previous Windows OS (operating system).

Note: Uninstalling Windows Xp doesn't delete your all your data files. However, most programs that you have installed after you installed Windows XP probably won't work. All you have to do to fix this, just reinstall them again. If you have created any documents or files, they should still be stored in C:\Documents and Settings\username\.

How to reinstall Windows XP ?

2009-01-06T03:51:00.000-08:00

First, locate the Windows CD that shipped with your PC, along with the CDs for your application software. If you downloaded your antivirus, firewall, or other programs, copy those downloads to a CD or to some other type of removable media. (If your system didn't ship with a Windows CD, your reinstallation files are situated on your hard drive; I'll describe how to access them in just a minute.) Also, dig up the instructions that your ISP sent you for configuring your network settings, and keep them close at hand.

Copy the contents of your 'C:\Documents and Settings' folder (or whichever folder you store your personal files on) to a CD or other removable medium. Then grab any other critical data and back it up. It helps to collect the installers for the latest drivers for your PC's graphics card and other hardware, too.

Ready to Reinstall

Now insert the Windows CD that came with your PC, and reboot your system. If you didn't receive a Windows disc with your machine, the files you need are sitting in a hidden partition on your hard drive. To access them, press the keys indicated on your screen when you reboot, but before Windows loads. The keys differ from vendor to vendor, so contact your PC's manufacturer if you don't see the prompt.

In many instances, the only available option is 'Return the drive to its factory condition', which destroys all documents, photos, and other data files on your PC. That's why you made a copy of your data folders.

You get more options--including the ability to preserve your files and settings--when you use Microsoft's own Windows XP installation disc. Make your selection, and follow the on-screen prompts to complete the reinstallation.

Starting Over

Regardless of which option you choose, you'll have to reconfigure your network connections, reinstall some of your device drivers, and update XP and your applications manually.

To configure your Internet connection, right-click My Network Places, click Create a new connection, and follow the prompts, entering the appropriate information you received from your ISP.

Once you've re-established your Internet link, you must reinstall and update your firewall, antivirus, and antispyware programs.

Next, check to see which of your device drivers need updates: Rght-click My Computer and select Properties, Hardware, Device Manager. Look for entries with yellow question marks or red exclamation points. A question mark indicates that Windows is using a generic driver for that device instead of one specifically designed for it; an exclamation point means that the device is not working.

The drivers for graphics boards, sound cards, and printers are most likely to need an update. If you haven't already done so, visit the vendors' Web sites to download updated drivers to your PC. Run the installer for each updated driver, allowing XP to reboot when needed, or right-click the entry in Device Manager, choose Update Driver, and step through the wizard, selecting No, not this time to the Windows Update question, and choosing the specified location option when it appears. When you can navigate to the driver file, select it and click OK to install it. When you finish updating your drivers, close all open windows.

Updates Galore

Your next stop is Microsoft's Windows Update site. Click Start, Windows Update, and follow the prompts. Since you'll probably be downloading many megabytes of updates, you might want to find yourself a good book or seek some other diversion while you wait.

When the downloading is complete, you'll be ready to reinstall and update your applications. Don't forget to update your critical apps as well. Microsoft Office, in particular has some important updates. Download them at the Microsoft Office Online Downloads page.

Once you've restored your applications, begin replacing your data. The first priorities are the My Documents and Application Data folders, which you'll find in the folder with your logon name inside 'C:\Documents and Settings'. To bring back your Internet Explorer favorites, restore the contents of the Favorites folder. Also restore the Shared Data and Application Data folders inside 'C:\Documents and Settings\Shared Documents'. Once you've reintroduced all of your data, your Windows refresh will be complete.

How to install Windows XP ?

2009-01-06T03:48:00.000-08:00

Installing Windows XP (Home or Professional Edition) can be very simple, even for those without much experience working with computers. This article assumes that you are installing Windows XP directly from a disc onto a clean, unpartitioned, unformatted hard drive, and that all computer components are installed and working correctly.

1. Ensure that your computer meets or exceeds the minimum system requirements to run Windows XP:

* 300 Mhz Intel or AMD CPU
* 128 Megabytes of system RAM (It can work with 64 Megabytes of RAM but its not recommended)
* 1.5 Gigabytes of available drive space
* Super VGA 800x600 Display Adapter
* CD or DVD-ROM
* Keyboard and mouse, or other pointing devices
* Network Interface Adapter required for Internet and Network Connectivity

2. Ensure you have a Windows XP Product Key. It is printed on a sticker on your software package. It is a string of 5 groups of characters (each 5 long), separated by dashes, resulting in 25 characters in all.

It looks like this: HHHCF-WCF9P-M3YCC-RXDXH-FC3C6.

When the software has almost finished installing, you will be asked for it.You need the product key to complete installing Windows.

3. Before inserting the CD, you'll have to enter bios (in most cases by presing DEL on system startup) and select your primary boot device CDrom. Insert the Windows XP Installation Disc and start your computer. When prompted to "Press any key to boot from CD," press a key on the keyboard.

4. The installation program will check your hardware, install default-set drivers, and load files necessary for installation. When arriving at the "Welcome to Setup" screen, Press ENTER to begin the installation process.

5. Read the License Agreement, and press F8 indicating you agree to its terms.

6. On the next screen, you are presented with a summary of the available partitions on your installed hard drives. At this point, you should see only one entry, "Unpartitioned Space." It will be highlighted in grey. Press C on your keyboard to begin creating partitions for the drive.

7. Enter the size in megabytes for the new partition. If you intend to install only one drive, enter the maximum amount shown. If you wish to create multiple partitions on a single drive, remember that Windows XP requires at least 1.5 Gigabytes of space, plus swap space, and areas for temporary files. A good rule of thumb is not to install Windows XP on a partition less than 5 Gigabytes, unless you wish to impact performance. When calculating, remember that there are 1,024 Megabytes per Gigabyte. Press ENTER once you have chosen your desired partition size.

8. The system will create your new partition, and you will now be at the partition summary screen once again. Select your new partition, usually labeled "C: Partition 1 [Raw]" and press ENTER.

9. Select either "Format the Partition using the NTFS File System" OR "Format the Partition using the FAT File System," and press ENTER. NTFS is the preferred method, supporting a larger amount of disk space per partition than FAT, and including security features at the file system level. NTFS also includes system level compression. If your partition is larger than 32 Gigabytes, you must choose NTFS. However, with a partition less than 32 Gigabytes, you can choose FAT, and convert to NTFS later should you desire. Be aware that NTFS cannot be converted back to FAT.

It is highly recommended to avoid Quick Format, as this skips an important process that checks the hard drive for errors or bad sectors. This scan is what consumes the majority of the time taken when performing a full format. If there are errors on a disk at the physical level, it's best to catch them now rather than later.

10. The system will now format the partition. The length of time this process requires depends on the speed and size of the drive, and the type of file system you selected earlier. In most cases, the larger the partition, the longer the process will take.

11. Windows will now start copying files from the installation disc and prompt you to reboot the computer when the process is completed. Press ENTER when prompted to reboot, otherwise it will do so automatically after 15 seconds.

12. This is the most time consuming part. When the computer reboots, do not press enter to boot from the disc this time, rather allow the computer to boot from the hard drive. If you are greeted with the Windows XP Boot screen, all is well so far.

13. Now the setup program will display various marketing information to you as it installs and configures itself to your system. The estimated time remaining is displayed in the lower left corner.

Note: it is normal for the screen to flicker, turn on and off, or resize during this process.

14. Sooner or later, a dialog window will appear, asking you to choose your Regional settings. Select appropriate settings native to your area. Click the "Next" button when that is completed.

15. Enter your Product Key, (otherwise known as a CD or Install Key,) at this window. You will not be able to complete this process without a valid Key. Click "Next" to continue.

16. If your computer is going to be on a LAN (Local Area Network) at home, or even just for kicks, give it a name.

17. Select your time zone, and ensure that the date/time are correct. Click "Next" to continue.

18. Leave "Typical Settings" selected for Network Setup, unless you have a specialized access device or protocol required. Refer to the documentation for that device for installation procedures.

19. Setup will continue to install other devices and peripherals connected to your machine, give you marketing and capability information, then reboot as before.

20. Congratulations! You've installed Windows XP. There are a few more additional set-up routines required, but you have completed the installation. Remove the CD from the drive.

21. Upon Reboot, click Yes when you are informed Windows will be changing your visual settings to improve quality.

22. In the next box, if you can read the text, press the "OK" button.

23. A similar screen to Part 2 of the install process will appear. If your computer is connected to the internet, select your connection type. Press Next to continue.

24. If connected to the Internet, Select "Activate Now."

25. After the Activation Process, a window will appear allowing you to select the users for the computer. Enter your name, and the names of others who will be using the machine. Press Next to continue.

26. You will now be looking at the default Windows XP Desktop. Congratulations!

How to repair Windows XP ?

2009-01-06T03:42:00.000-08:00

How do you perform a reinstallation of Windows XP, sometimes called a repair installation?

Configure your computer to start from the CD-ROM drive. For more information about how to do this, refer to your computer's documentation or contact your computer manufacturer. Then insert your Windows XP Setup CD, and restart your computer.

1. When the Press any key to boot from CD message is displayed on your screen, press a key to start your computer from the Windows XP CD.

2. Press ENTER when you see the message To setup Windows XP now, and then press ENTER displayed on the Welcome to Setup screen.

3. Do not choose the option to press R to use the Recovery Console.

4. In the Windows XP Licensing Agreement, press F8 to agree to the license agreement.

5. Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.

6. Follow the instructions on the screen to complete Setup.

Facebook Hacks

2008-03-24T02:42:00.000-07:00

1. Hack Facebook Photos | Hack Facebook Album

Yahoo Hacks

2008-03-16T07:45:00.001-07:00

1. Yahoo Messenger Password Hacker Cracker Stealer Breaker

2. Yahoo Web Messenger

Windows XP

2008-03-16T07:45:00.000-07:00

1. What is Windows XP Hotfix ?

2. What is Windows XP ?

3. How to clean Windows XP ?

4. How to reboot Windows XP ?

5. How to backup Windows XP ?

6. How to uninstall Windows XP ?

7. How to reinstall Windows XP ?

8. How to install Windows XP ?

9. How to repair Windows XP ?

10. Hard Drive not Recognized/ Found/ Detected/ Accessible

11. CD/DVD Drive Not Detected

Task Manager

2008-03-16T07:42:00.001-07:00

1. How to disable task manager in Windows Vista/ XP [gpedit]

2. How to disable task manager in Windows Vista/XP [regedit]

3. How to enable task manager in Windows Vista/ XP [Registry]

4. Windows XP Task Manager Disabled By Virus / Administrator

Orkut Hacks

2008-03-16T07:29:00.000-07:00

1. Orkut Scrap Flooder | Orkut Scrapbook Flooding Technique

2. Hack Orkut Photos | Orkut Album Hack

3. Protect Orkut Account From Hacking

4. Hack Orkut Account | Orkut Password Hacker Cracker

5. Orkut Fake Login Page | Orkut Phishing Technique

6. Orkut Password Recovery | Solution For Hacked Account

Myspace Hacks

2008-01-23T06:07:00.000-08:00

1. How To View Private Myspace Profiles Pages, Comments, Pictures, Friends, Videos

2. How To Hack Myspace Account | Myspace Password Hacker Cracker Stealer Breaker